Software / Hardware conflict?

[Bjwck]

Hi there

Could you possibly advise please

I have built a machine all part purchased from Aria, 3rd purchase & very happy with service

We have a problem though

the mother board is a MSIK9N NEO-F nF550, with an AM2 cpu, & SATA HD drive, amongst other bits

Our problem is when we load in the m/board driver, the machine locks up, when we just let XP sort a generic driver out it works ok, apart from the network, we have been onto MSI update & loaded the LAN driver in separatley, but we can still not get the network to work.

Any advice at all?

Many thanks Brian

[John LG]

Start, control panel, system, hardware tab, device manager... any yellow errors here???

[Belso]

Try downloading the file from here. And running it directly inside Windows.

http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=733&kind=1

[Mighty_Jah]

Long shot...but...check the bios to see if the onboard adapter is activated...You prolly aint messed around in there...so it will as mentioned prolly be a driver prob...some of those disk's that come with the board are rubbish and contain ancient drivers.


hope this helps....
Mighty... :wink:

[Sean]

Also grab the latest drivers from www.nvidia.com - you can be sure then that they are the absolute latest.

[Bjwck]

Hi there sorry for late reply been away on busniess.

Thanks everyone for your suggestions

We will try looking through your suggestions & will come back with results

Thanks again

bjwck