sjread75
21-04-08, 15:26
Hi everybody,
I have the following CPU -
Intel (R) Core 2 Quad CPU & 2.40GHz
Freq 3.61GHz
FSB Speed 1608MHz
Cache L1 128 KB
Cache L2 8192 KB
CPUID6F7
Ratio Status:Unlocked (Max:0.9, Min:06.0)
Ratio Actual Value :9
and 4, 1GB sticks of OCZ 2GB PC3-10666 Gold (4x1GB). I am having severe problems setting up the memory in the bios. Because the memory isnt set right, the computer freezes frequently when transferring files from one hard drive to another or just at times randomly.
Can anyone help with the settings?
The board as an Asus P5K3 Deluxe. The following settings are in the bios -
Ai Overclocking Tuner - Manual/Auto/N.O.S
CPU Ratio Setting
FSB Strap to North Bridge - Auto/200/266/333/400
FSB Frequency - Auto or 200 to 800
PCIE Frequency - Auto or 100 - 150
DRAM Freq - Auto/DDR3 800/961/1003/1066/1200/1280/1334/1600
DRAM Command Rate - Auto/1N/2N
DRAM Timing Control - Auto/Manual
CAS# Latency - 5-10 DRAM Clocks
RAS# to CAS# Delay - 3 to 10 DRAM Clocks
RAS# PRE Time - 3 to 10 DRAM Clocks
RAS# ACT Time - 3 to 34 DRAM Clocks
RAS# to RAS# Delay - Auto/1 to 15 DRAM Clocks
REF Cycle Time - Auto/30 DRAM Clocks/36/48/60/72
Write Recovery Time - Auto/1 to 15 DRAM Clocks
Write to Read Delay - Auto/1 to 15 DRAM Clocks
Read to Pre Time - Auto/1 to 15 DRAM Clocks
DRAM Static Read Control - Auto/Disabled/Enabled
DRAM Dynamic Write Control - Auto/Disabled/Enabled
Transaction BoosterCPU Voltage - Auto/Disabled/Enabled
CPU PLL Voltage - Auto/1.5v/1.6v/1.7v/1.8v
DRAM Voltage - Auto/ 1.5v up to 2.25v increments of 0.05v
NB Voltage - Auto/1.25v/1.4v/1.55v/1.7v
SB Voltage - Auto/1.05v/1.2v
Clock Over-Charging Voltage - Auto/0.7v/0/8v/0.9v/1.0v
Load-Line Calibration - Auto/Disabled/Enabled
CPU GTL Voltage Reference - Auto/0.63x/0.61x/0.59x/0.57x
NB GTL Voltage Reference - Auto/0.67x/0.61x
CPU Spread Spectrum - Auto/Disabled
PCIE Spread Spectrum - Auto/Disabled
I hope that i have made it slight easier for you to help me instead of you typing everything out, you can just delete the unused values.
CPU Config -
Intel (R) Core 2 Quad CPU & 2.40GHz
Freq 3.61GHz
FSB Speed 1608MHz
Cache L1 128 KB
Cache L2 8192 KB
CPUID6F7
Ratio Status:Unlocked (Max:0.9, Min:06.0)
Ratio Actual Value :9
Thanks for your help
I have the following CPU -
Intel (R) Core 2 Quad CPU & 2.40GHz
Freq 3.61GHz
FSB Speed 1608MHz
Cache L1 128 KB
Cache L2 8192 KB
CPUID6F7
Ratio Status:Unlocked (Max:0.9, Min:06.0)
Ratio Actual Value :9
and 4, 1GB sticks of OCZ 2GB PC3-10666 Gold (4x1GB). I am having severe problems setting up the memory in the bios. Because the memory isnt set right, the computer freezes frequently when transferring files from one hard drive to another or just at times randomly.
Can anyone help with the settings?
The board as an Asus P5K3 Deluxe. The following settings are in the bios -
Ai Overclocking Tuner - Manual/Auto/N.O.S
CPU Ratio Setting
FSB Strap to North Bridge - Auto/200/266/333/400
FSB Frequency - Auto or 200 to 800
PCIE Frequency - Auto or 100 - 150
DRAM Freq - Auto/DDR3 800/961/1003/1066/1200/1280/1334/1600
DRAM Command Rate - Auto/1N/2N
DRAM Timing Control - Auto/Manual
CAS# Latency - 5-10 DRAM Clocks
RAS# to CAS# Delay - 3 to 10 DRAM Clocks
RAS# PRE Time - 3 to 10 DRAM Clocks
RAS# ACT Time - 3 to 34 DRAM Clocks
RAS# to RAS# Delay - Auto/1 to 15 DRAM Clocks
REF Cycle Time - Auto/30 DRAM Clocks/36/48/60/72
Write Recovery Time - Auto/1 to 15 DRAM Clocks
Write to Read Delay - Auto/1 to 15 DRAM Clocks
Read to Pre Time - Auto/1 to 15 DRAM Clocks
DRAM Static Read Control - Auto/Disabled/Enabled
DRAM Dynamic Write Control - Auto/Disabled/Enabled
Transaction BoosterCPU Voltage - Auto/Disabled/Enabled
CPU PLL Voltage - Auto/1.5v/1.6v/1.7v/1.8v
DRAM Voltage - Auto/ 1.5v up to 2.25v increments of 0.05v
NB Voltage - Auto/1.25v/1.4v/1.55v/1.7v
SB Voltage - Auto/1.05v/1.2v
Clock Over-Charging Voltage - Auto/0.7v/0/8v/0.9v/1.0v
Load-Line Calibration - Auto/Disabled/Enabled
CPU GTL Voltage Reference - Auto/0.63x/0.61x/0.59x/0.57x
NB GTL Voltage Reference - Auto/0.67x/0.61x
CPU Spread Spectrum - Auto/Disabled
PCIE Spread Spectrum - Auto/Disabled
I hope that i have made it slight easier for you to help me instead of you typing everything out, you can just delete the unused values.
CPU Config -
Intel (R) Core 2 Quad CPU & 2.40GHz
Freq 3.61GHz
FSB Speed 1608MHz
Cache L1 128 KB
Cache L2 8192 KB
CPUID6F7
Ratio Status:Unlocked (Max:0.9, Min:06.0)
Ratio Actual Value :9
Thanks for your help