Ferrari Case

[pob13]

I have recently built a computer for a friend using one of your ferrari cases, the front USB conectors do not appear to correspond to the motherboard markings, can you please explain what the indicators on the case wire's stand for. :?:

[Firerat]

list the markings on the cables, and on your motherboard

[Sleepy]

It might be easier to go by colour codes i.e. from pin 1 on the USB header it is:

Red/White/Green/Black
Red/White/Green/Black

Pin 1 is usually on the bottom row, the pin closest to the rear, but check your mobo manual. Also be aware that occasionally, the pins reverse on the second row i.e.

Black/Green/White/Red
Red/White/Green/Black

This was normally found on cheaper mobo's from the likes of PCChips etc, although i believe even they now resort to the standard methods described in the first example. Just check to make sure where pin 1 is and which direction the order is.